Included with each GeoPool:

  • Modular frames, Clean Out Gates, and Dump Doors.
  • Filter Fabric (choice of Type-A or Type-B)
  • Assembly hardware kit
  • Assembly tool kit
  • Assembly supervision and on-site training by a factory technician
  • All weather Operations and Maintenance Manual storage box.

FEATURES & BENEFITS​

Inexpensive

Since the filter fabric can be easily replaced after it wears out dewatering costs can be reduced significantly. The price to re-line the largest GeoPool which can handle up to 14,000 yds3 (10,704m3) is less than $3,000 US or less than the price of a small single geotextile tube. Maintenance is inexpensive and replacement frames, dump doors, gates, and fabric are a phone call away.

Reusable

The GeoPool’s robust steel construction is hot dip galvanized and made to last. The GeoPool’s clean out gates allow the pool to be cleaned out and be put immediately back into service again and again. 

Scalable

The GeoPool’s modular frames allow it to be sized up or sized down for a specific project based on the allowable foot print or required dewatering capacity.

Rapid Dewatering

The patented Dump Door technology allows for rapid release of settled surface water instead of having to pass directly through the fabric. This bulk dewatering advantage sets the GeoPool apart from other fabric dewatering technologies and mechanical dewatering technologies.

Versatile

The GeoPool can be used to dewater a variety of materials. When discharging ultra fine particles like clay, municipal sludge or certain industrial sludges, it is recommended to use a polymer / floc.

Non-Mechanical

The GeoPool requires no power and has no moving parts reducing overall maintenance and service costs over the lifespan of the equipment.

No Power Required

Since GeoPools require no power they are much less expensive to operate than centrifuges, filter presses, and dryers.

Easy Assembly

The GeoPool does not require an army of dump trucks to haul material in to construct a dewatering berm. Instead 2-4 trucks will deliver the frames to the job site and the modular GeoPool sections can be bolted together with the provided tool kit and hardware kit supplied with the GeoPool. Depending on the size of the pool you can have a complete dewatering site in less than 5-7 days.

Model Specifications

V4 GeoPool

  • Volume (estimated): 4,050 yd3 / 3,096m3
  • Circumference: 401.7ft / 122.5m
  • Diameter: 127.8 ft / 39m
  • Depth: 8 ft / 2.44m
  • Frame Count – 8.25 ft. (2.51m) each (46)
  • Dump Doors (fits inside frame assembly) (2)
  • Clean Out Gates – 10.25 ft. (3.13m) each (2)
  • Days of Set-Up Supervision & Training (5 days)
  • Export Ocean Containers – (2) 40ft High Cube
  • Domestic Trucking – (1) 53ft Step (1) 48ft Flat

V5 GeoPool

  • Volume (estimated): 5,100 yd3 / 3,899m3
  • Circumference: 451.7ft / 137.7m
  • Diameter: 143.8 ft / 43.8m
  • Depth: 8 ft / 2.44m
  • Frame Count – 8.25 ft. (2.51m) each (52)
  • Dump Doors (fits inside frame assembly) (2)
  • Clean Out Gates – 10.25 ft. (3.13m) each (2)
  • Days of Set-Up Supervision & Training (5 days)
  • Export Ocean Containers – (3) 40ft High Cube
  • Domestic Trucking – (2) 53ft Step 

V6 GeoPool

  • Volume (estimated): 6,075 yd3 / 4,642m3
  • Circumference: 493.4ft / 150.4m
  • Diameter: 157 ft / 47.8m
  • Depth: 8 ft / 2.44m
  • Frame Count – 8.25 ft. (2.51m) each (57)
  • Dump Doors (fits inside frame assembly) (2)
  • Clean Out Gates – 10.25 ft. (3.13m) each (2)
  • Days of Set-Up Supervision & Training (5 days)
  • Export Ocean Containers – (3) 40ft High Cube
  • Domestic Trucking – (2) 53ft Step 

V8 GeoPool

  • Volume (estimated): 8,000 yd3 / 6,116m3
  • Circumference: 567.9ft / 173.1m
  • Diameter: 180.8 ft / 55.2m
  • Depth: 8 ft / 2.44m
  • Frame Count – 8.25 ft. (2.51m) each (66)
  • Dump Doors (fits inside frame assembly) (2)
  • Clean Out Gates – 10.25 ft. (3.13m) each (2)
  • Days of Set-Up Supervision & Training (6 days)
  • Export Ocean Containers – (3) 40ft High Cube
  • Domestic Trucking – (2) 53ft Step (1) 48ft Flat

V10 GeoPool

  • Volume (estimated): 10,150 yd3 / 7,660m3
  • Circumference: 643.3ft / 196.1m
  • Diameter: 204.8 ft / 62.4m
  • Depth: 8 ft / 2.44m
  • Frame Count – 8.25 ft. (2.51m) each (75)
  • Dump Doors (fits inside frame assembly) (2)
  • Clean Out Gates – 10.25 ft. (3.13m) each (2)
  • Days of Set-Up Supervision & Training (6 days)
  • Export Ocean Containers – (4) 40ft High Cube (1) 20ft
  • Domestic Trucking – (2) 53ft Step (1) 48ft Flat

V12 GeoPool

  • Volume (estimated): 12,000 yd3 / 9,175m3
  • Circumference: 701.5ft / 213.9m
  • Diameter: 223.4 ft / 68.2m
  • Depth: 8 ft / 2.44m
  • Frame Count – 8.25 ft. (2.51m) each (82)
  • Dump Doors (fits inside frame assembly) (2)
  • Clean Out Gates – 10.25 ft. (3.13m) each (2)
  • Days of Set-Up Supervision & Training (7 days)
  • Export Ocean Containers – (4) 40ft High Cube (1) 20ft
  • Domestic Trucking – (2) 53ft Step (1) 48ft Flat

V14 GeoPool

  • Volume (estimated): 14,000 yd3 / 10,704m3
  • Circumference: 759.8ft / 231.6m
  • Diameter: 241.8 ft / 73.9m
  • Depth: 8 ft / 2.44m
  • Frame Count – 8.25 ft. (2.51m) each (89)
  • Dump Doors (fits inside frame assembly) (2)
  • Clean Out Gates – 10.25 ft. (3.13m) each (2)
  • Days of Set-Up Supervision & Training (7 days)
  • Export Ocean Containers – (4) 40ft High Cube (1) 20ft
  • Domestic Trucking – (2) 53ft Step (1) 48ft Flat